5 MW Biomass Power Plant & Gasification System
Powermax provides complete, industrial-grade engineering and equipment manufacturing for 5 MW biomass power plants. Engineered for high-efficiency electricity generation and thermal energy recovery, our 5 MW systems are custom-configured based on your specific feedstock type and moisture content, utilizing proven multi-unit parallel scaling or high-capacity fluidized-bed technology.
5 MW System Technical Specifications
| Parameter | Standard Config (WUFBG Parallel) | Alternative Config (CFBG Continuous) |
|---|---|---|
| Total Plant Capacity | 5 MW Electricity / Modular Turnkey Design | 5 MW Grid-Tied Power / Single or Dual Line |
| Configuration Setup | 5 × 1 MW Gasification Modules in Parallel | 2 × CFBG High-Capacity Systems |
| Feedstock Flexibility | Wood chips, bark, coconut shells, wet agricultural waste | Fine, dry particles (rice husk, sawdust, straw) |
| Moisture Tolerance | ≤55% (wet basis) — No pre-drying needed | ≤20% (wet basis) — Optimal for dry milling residues |
| System Byproduct | High-purity biochar (Eligible for CDR carbon credits) | Industrial dry ash |
| Automation Level | Full PLC automated control system | Continuous DCS control panel |
Engineered Solutions & Proven Field Deployments
■ Modular Multi-Unit Parallel Systems (1 MW × 5 Setup)
Our 5 MW plant design heavily utilizes parallel multi-unit deployment. By clustering modular 1 MW systems, we deliver maximum operational redundancy, high part-load efficiency, and zero-downtime maintenance cycles for continuous industrial operations.
Project Validation: This modular engineering logic is fully proven in Shwelaung, Myanmar, where our 12×1 MW parallel biomass gasification system (6 MW fully commissioned) has operated reliably for over 3 years using local rice husk.
■ High-Moisture Fixed-Bed Gasification Systems
Designed specifically for heavy industrial biomass like wood waste and forestry residues. This system tolerates high-moisture feedstocks natively, significantly cutting down the CAPEX and land footprint required for extensive pre-drying lines.
Project Validation: Powermax's heavy-duty gasification technology powers a massive 9 MW thermal energy plant in Hanoi, Vietnam, converting wet wood chips into clean industrial syngas to replace coal burners for ceramic kilns.
Full-Chain Scope of Supply & EPC Services
As a leading technology provider, Powermax provides comprehensive engineering support from inception to grid connection:
• Engineering & Design: Custom syngas clean-up layouts, piping schematics, and automation alignment based on local fuel tests.
• Equipment Manufacturing: Heavy-duty gasifiers, automated feeding mechanisms, multi-stage cooling systems, and specialized syngas generator sets.
• Turnkey EPC Execution: Overseas foundations design review, on-site mechanical installation, system commissioning, and localized operator training.
• Carbon Sequestration (CDR) Optimization: Our systems are ready for the modern ESG marketplace. The high-quality biochar co-produced during gasification enables plant operators to participate in Carbon Dioxide Removal (CDR) initiatives and secure additional carbon credit yields.
